Before your installation please note that Laptop internal parts, cables and sockets are very fragile and easy to brake.
General instruction for a PC laptop.

Laptop 1.

Step 1: Removing Rubber and Plastic Grommets.Locate all grommets (screw covers), which may be facing you on the display assembly or on the side of the display assembly. Remove them by picking them off with a pointed object.

0015

0017

Step 2: Removing Screws from Display Assembly.
Remove all screws from the display assembly, that were located under the grommets.

19

Step 3: Removing Front Bezel.
Starting on either side of the display assembly, insert your fingers between the screen and the front bezel and work your way around. The bezel will unsnap. If you are having trouble, work it from side to side until it unsnaps. You may have to slide the latch open to unsnap the bezel.

22

Step 4: Removing Screen from Internal Brackets.
Lean the screen with its internal metal brackets forward away from the rear plastic bezel
enough to access the screws securing the screen to the bracket. Remove the screws and
then lay the screen on a piece of soft cloth on the keyboard.

23

25

26

Step 5: Disconnecting Video Data Cable.
Lift up on the piece of tape (if any) securing the video cable to the rear of the screen. Then using your finger nail, slide the video data cable out of the video data connector port.

27
Step 6: Unplugging Power Inverter Cable.

Locate the inverter which is a slender device underneath the screen that provides power to the backlight. Using your thumb nail, slide the inverter cable plug out of the inverter.

28

29